CLC 15-150 A/B

A two component, heat cure epoxy system specifically developed for use on instrument and power transformers. The cured material exhibits excellent thermal stability and thermal cycling endurance. Product meets UL 94-HB flammability requirements. CLC 15-150 A/B

CLC 16-228

A two component, room temperature cure patching and sealing compound. This product has excellent adhesion to plastics and various metals. CLC 16-228

CLP 7106 / CLI 4010

Flexible polyurethane system for potting and casting in electrical applications. A two component, low viscosity, low durometer, polyurethane potting compound. The cured material meets the requirements of UL94-V0. CLP 7106 / CLI 4010

CLP 7330 / CLI 4161

Economical, flexible, potting and casting polyurethane system. a solventless, low viscosity, flexible, two component polyurethane casting resin. CLP 7330 / CLI 4161

CLR 1020 / CLH 6021

Semi-flexible epoxy adhesive and casting system. An unfilled, semi-flexible two component epoxy system. Its low mixed viscosity makes it suitable for potting and encapsulating electronic components. CLR 1020 / CLH 6021

CLR 1026 / CLH 6021

Low viscosity, semi-flexible. An unfilled, semi-flexible two component epoxy system. Its low mixed viscosity makes it suitable for potting and encapsulating electronic components. CLR 1026 / CLH 6021

CLR 1066 / CLH 6330

Low Exotherm, Low shrinkage epoxy. A two component, long pot life casting system with low exotherm, low shrinkage and excellent thermal shock resistance. CLR 1066 / CLH 6330

CLR 1066 / CLH 6930

Large mass casting, 30-minute pot life. Masses larger than 6Lbs. A two component, filled, room temperature cure epoxy system.the product has a low exotherm and low shrinkage, making it suitable for castings larger than 3 kgs. CLR 1066 / CLH 6930

CLR 1180 / CLH 6020

A low viscosity, two component, unfilled, room temperature cure, epoxy system. This system provides resiliency and strength making it suitable for a variety of applications. ie. adhesives, castings, coatings and tooling. CLR 1180 / CLH 6020

CLR 1190 / CLH 6025

General purpose variable substrate adhesive. A medium viscosity, unfilled casting system. It is suitable for large mass castings and exhibits good impact resistance. CLR 1190 / CLH 6025

CLR 1190 / CLH 6140

General purpose variable substrate adhesive. A two component room temperature curing epoxy system. Product is suitable for potting, adhesive, and coating applications. Product meets the food and drug administration (FDA) regulations permitting use in food contact applications. CLR 1190 / CLH 6140

CLR 1190 / CLH 6560

Low viscosity, RT cure. Impact resistant. Excellent thermal cycle. An exceptionally tough epoxy casting system with excellent low temperature thermal and mechanical shock resistance. CLR 1190 / CLH 6560

XRD 1014 / XHD 1015

High temperature clear epoxy. An unfilled, heat resistant, clear laminating system. Products low viscosity gives the system excellent wet-out properties to fibreglass and other reinforcing fibres. The material exhibits high physical strengths and modulus with moderate post cure temperatures. XRD 1014 / XHD 1015

XRD 1018 / XHD 1019

1:1 Mix Ratio, 130°C Operating, General Purpose, Low cost. A two component, room temperature cure semi-flexible, flame retardant, epoxy system. The system was developed for potting/casting of electrical and electronic components. Its use of non-abrasive fillers and convenient 1 to 1 ratio by volume, make it ideal for use in machine dispensing equipment. This product meets UL94-V0 in house flammability testing. XRD 1018 / XHD 1019